(no commit message)

diff --git a/guider.mdwn b/guider.mdwn
index 852aa02f46759992ddb5f20db59147951a985efd..0fcd584506430479dab250b9c9a3904ab9b839c5 100644 (file)
--- a/guider.mdwn
+++ b/guider.mdwn
@@ -6,22 +6,11 @@ No warranty provided. Here you will find some results from our meetings.
 
 To be clear, these guides are a few years old (2016-2019), and there is for instance a new libreboot version since then <https://libreboot.org/news/libreboot20210522.html>. Not a big deal, but something to investigate.
 
 
 To be clear, these guides are a few years old (2016-2019), and there is for instance a new libreboot version since then <https://libreboot.org/news/libreboot20210522.html>. Not a big deal, but something to investigate.
 

-# Coreboot and Libreboot general
+# Coreboot and Libreboot introduction

 
 

-## Our external flashing setup
-
-BeagleBone Black (BBB), powered by USB. 5A 2A
+For more information about Libreboot see <libreboot.org>, here we only quickly describe some hints and script we used during flashing.

 
 

-Tip: Don't power anything from a regular (computer) ATX power supply, it will work but is unreliable and a time waster.
-
-Current setup is to connect to the BBB via Ethernet to a router and thus SSH. Can also connect directly with the SPI interface, see Libreboot flashing guide.
-
-Pomona chip holders
-
-10cm wires
-
-
-## General
+Note, it is not possible to run Windows on Libreboot/Coreboot but it is possible to run free operating systems like Linux and BSD.

 
 For flashing see this [(X200 Libreboot) guide](https://libreboot.org/docs/install/x200_external.html) for a general idea, however each system has their own chip configuration which differs a little.
 
 
 For flashing see this [(X200 Libreboot) guide](https://libreboot.org/docs/install/x200_external.html) for a general idea, however each system has their own chip configuration which differs a little.
 


@@ -37,6 +26,20 @@ But since [Libreboot 20210522](https://libreboot.org/news/libreboot20210522.html
 
 # General flash guides 
 
 
 # General flash guides 
 

+## Our external flashing setup
+
+BeagleBone Black (BBB), powered by USB. 5A 2A
+
+Tip: Don't power anything from a regular (computer) ATX power supply, it will work but is unreliable and a time waster.
+
+Current setup is to connect to the BBB via Ethernet to a router and thus SSH. Can also connect directly with the SPI interface, see Libreboot flashing guide.
+
+Pomona chip holders
+
+10cm wires
+
+
+

 ## Flashing Internally
 
 To internally flash your ROM (on Coreboot or Libreboot) use the kernel parameter "iomem=relaxed". Thus, if you boot manually you would enter e g "linux=vmlinuz.. iomem=relaxed".
 ## Flashing Internally
 
 To internally flash your ROM (on Coreboot or Libreboot) use the kernel parameter "iomem=relaxed". Thus, if you boot manually you would enter e g "linux=vmlinuz.. iomem=relaxed".