From 3190cae65f7345dae26b2caf7d3337f01a4339dd Mon Sep 17 00:00:00 2001
From: eliot <eliot@web>
Date: Sat, 29 Aug 2020 17:00:30 +0200
Subject: [PATCH] Minor update

---
 guider.mdwn | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/guider.mdwn b/guider.mdwn
index c8b792b..aac2173 100644
--- a/guider.mdwn
+++ b/guider.mdwn
@@ -1,5 +1,9 @@
 [[!toc levels=3]]
 
+No warranty provided. Here you will find some results from our meetings.
+
+BEFORE flashing make sure EC version is up to date (yes it's proprietary).
+
 ## Coreboot for T400 without blobs
 Here's our config for coreboot, copy it here to this path [coreboot/.config](t400_coreboot/).
 ( Below in the text we refer to it as ~/coreboot_config_t400_8mb )
@@ -70,7 +74,7 @@ Here's our config for coreboot, copy it here to this path [coreboot/.config](t40
     
 ## Coreboot for X230
 
-Make sure bios has latest EC version.
+Make sure bios has latest EC version. We had  EC 1.14 (G2HT35WW).
 
 ### Internally
 
@@ -81,7 +85,7 @@ See: <https://doc.coreboot.org/mainboard/lenovo/ivb_internal_flashing.html?highl
 
 Warning, we tried this method and accidentally lost a resistor same as
 <https://www.reddit.com/r/coreboot/comments/dhwdss/did_i_just_brick_my_x230/fmytpm0/?utm_source=reddit&utm_medium=web2x&context=3> (supposedly a R1378, SMD 33.2Ω resistor). With open circuit here computer cannot boot, however by adding it back or by shorting it it will be able to boot (after booting the computer can run with an open circuit here, but do not recommend).
-Additionally, after asking on IRC the recommendation was to, on the signal lines, add a resistor e.g. 47 Ohm... assumably for both data lines and clock? Or just flash internally...
+Additionally, after asking on IRC the recommendation was to, on the signal lines, add a resistor e.g. 47 Ohm... presumably for both data lines and clock? Or just flash internally...
 
 See (POSSIBLY OUTDATED LINKS):
 
-- 
2.39.2