From b0213a8b5f6ed1154bcbd82e931daab3f1156fa4 Mon Sep 17 00:00:00 2001 From: eliot Date: Sat, 17 Feb 2018 17:21:39 +0100 Subject: [PATCH] Adding D16 pics --- guider/index.mdwn | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/guider/index.mdwn b/guider/index.mdwn index be41ab1..fc50b88 100644 --- a/guider/index.mdwn +++ b/guider/index.mdwn @@ -78,6 +78,7 @@ If you don't encrypt /boot the default GRUB-scripts works better, i e it boots a ####General (Libreboot-20160907) + * Do NOT use cheap Chinese 12v connectors, they will melt! * RAM is sensitive, less is more likely to work. See [coreboot wiki](https://www.coreboot.org/Board:asus/kgpe-d16) for working configurations * Use 62xx-series CPUs, because Libreboot does not update (proprietary) microcode. However, this should be up to you. (See [Libreboot](https://libreboot.org/docs/hardware/kgpe-d16.html)) * Internal GPU works (for text mode only), note the hardware switch (see motherboard manual) @@ -115,7 +116,11 @@ TODO improve GRUB config Buy a couple of flash chips in case of you breaking them, and to test different payloads. Furthermore, one could buy a proprietary chip just to debug the hardware. [D16-chip](../resources/d16_chip.png) +[Beagleboard Black P9 connector](../resources/BBB_P9.png.png) +[Failed flashed try 1 (use Pomona holder), but should be correctly connected](../resources/fail_flash_1.png) +[Failed flashed try 2 (use Pomona holder), but should be correctly connected](../resources/fail_flash_2.png) + fail_flash_1.png fail_flash_2.jpg ROM-chip (eg.): Winbond W25Q16DV (Note: the image built from Libreboot needs to match the ROM size. Specifically, if you're choosing pre-built this must match exactly AFAIK) ROM-holder (eg.): 3M IC test socket, DIP 18, 218-3341-00-0602J -- 2.39.2